| Catalogue
Number |
Name |
Dwell
time and temperature for
a 96 well plate |
Dwell
time and temperature for
a 348 Well Plate |
| 4ti-0521 |
Peel-Seal |
175°C – 3sec |
175°C – 2sec |
| 4ti-0531 |
Pierce-Seal |
175°C – 2.5sec |
175°C – 2sec |
| 4ti-0533 |
Pierce-Seal
Strong |
175°C – 2.5sec |
175°C – 2sec |
| 4ti-0536 |
Foil-Seal |
175°C – 2.5sec |
175°C – 2sec |
| 4ti-0541 |
Clear-Seal |
170°C – 2sec |
170°C – 2sec |
4ti-0571 &
4ti-0573 |
Clear
Weld Seal & Mk. II version |
170°C – 2sec |
170°C – 2sec |
| 4ti-0580 |
Clear-Seal
3730 |
170°C – 2sec |
170°C – 1.5sec |
| 4ti-0591 |
Thermal
Bond |
175°C – 2.5sec |
175°C – 2sec |
|
These values are for guidance only. It is advisable
to conduct individual trials depending on the plate
type being sealed.
These values are for sealing with the 4titude 4Sealer (Cat.
No. 4ti-0600). If using an automated sealer, reduce
the dwell time by 0.5 - 1.0 second.
Certain seals such as the Peel-Seal are prone to curling
prior to sealing. To overcome this issue, place a weighted
metal sheet (4ti-0601) over the seal prior to sealing
to keep the seal flat. If this item is being used,
increase the dwell time by 1 second.
|
