4TI-INFO@BROOKS.COM | +44 1306 884 885
CONTACT US | DOWNLOADS | EXHIBITIONS
FrameStar® 384 Well Skirted PCR Plate
Round 96 Deep Well Storage Plates for use with Magnetic Separators
1.5 and 2.0 ml Microcentrifuge Tubes
Low Binding Products
Low profile, 0.1 ml polypropylene wells, polycarbonate frame, cut corner H12, working volume: <100 µl, total well capacity: 200 µl; designed for use on Roche LightCycler® 96 and 480 (with 96 well block); extra white wells for improved sensitivity in fluorescent assays
Available in the following colours
"FrameStar® plates led to significantly better results and reduced evaporation compared to standard PCR plates."
Our FrameStar® Roche Style plates are designed to achieve optimised assay conditions on the Roche LightCycler® 96 and 480 (with 96 well block).
This particular style of plate is in a low profile 96-well format; perfect for reaction volumes of 10-100 µl. The wells are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20 µl.
The extra white wells allow for increased sensitivity in fluorescent assays.
The semi-skirted frame allows for labelling or barcoding.
Ct values of data run on a Roche LightCycler® 480, comparing 4titude FrameStar® Roche Style, High Sensitivity plates (4ti-0954) and Competitor R equivalent plates. The new 4titude 4ti-0954 plate out performs the competitor plate with significantly earlier Ct values.
This plate is available with linear Code 128-format barcodes to aid identification and traceability for your samples. To order your plates with barcodes, simply add /SBC to the end of the ordering code for Standard Single Barcoding, /DBC for Standard Double Barcoding, /TBC for Standard Triple Barcoding, or /QBC for Standard Quadruple Barcoding (see Barcoding for more details).
For recommended plate options please refer to the Instrument Compatibility Table.
Click here to find out more about our Adhesive Seal range >>
Click here to find out more about our Heat Seal range >>
Click here to find out more about our Cap Strip range >>
Click here to find out more about our Lids and Mats >>
Find out more