4TI-INFO@BROOKS.COM | +44 1306 884 885
CONTACT US | DOWNLOADS | EXHIBITIONS
FrameStar® 384 Well Skirted PCR Plate
Round 96 Deep Well Storage Plates for use with Magnetic Separators
1.5 and 2.0 ml Microcentrifuge Tubes
Low Binding Products
Double sided adhesive film, black, with 96 holes and a protective liner, peelable; suitable for re-sealing without the need for a heat sealer
Available in the following colours
A double sided black adhesive microplate film to facilitate the sealing, accessing (piercing) and resealing of Vari-Strips™ (4ti-0753) prior to PCR.
The strips or plates are filled with reagents and sealed with Pierce Seal (4ti-0530) resulting in lowest evaporation and best possible long-term storage. With the use of a pierceable seal, samples can easily be added at the point of diagnostic use.
The protective InterSeal makes sure there will be no damage to the Pierce Seal during transportation. The InterSeal is overlaid and the strips or plates processed with the Plate Cutter (4ti-3000) into individually sealed strips.
The strips can then be transported and opened at a customer site by peeling off the protective layer of the InterSeal and accessing the sample through the Pierce Seal. The strips can then be resealed with a foil or film which is applied to the exposed black adhesive without the need for a heat sealer.
For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502).
This short video shows off the shelf solutions for manufacturing diagnostics kits, using our Vari-Plates™ range and InterSeal from the manufacturer to the point of diagnostics use.
Find out more